USES

使用前建議先將地板表面清理乾淨。若地板殘留著前一次的地板硬光蠟，使用DIRECTPRO ^®M200除蠟劑均勻噴灑其上，以手工或機械單盤機協助去除蠟膜，可以大幅度增加工作效率。DIRECTPRO ^®M200為高濃度的除蠟劑，使用時可以對水稀釋5~10倍，效果依舊傑出。使用完畢可以以乾布擦乾或濕式吸塵器吸乾。

 TYPICAL PROPERTIES (Material Safety Data Sheet)

l        APPEARANCE           : Clear solution

l     COMPONENTS         :
NaOH                                      12~15%
Surfactant                                5~8%
High Kb value Solvent           9~12%
Additives                                  5~8%

l        pH(1%)                         :14

l      Hazardous Ingredients: No hazardous ingredients known at this time.

l      Reactivity Data :
Hazardous Polymerization: Will not occur.
Incompatibility: None Known to cause dangerous condition.

l      Fire and Explosion: Nonflammable
flash point: N.D.

l      Health Hazards :
Eye Contact: This material is expected to be an Eye Contact hazard.
Skin Absorption: Although no appropriate human or animal health effects data are known to exist, this material is expected to cause skin irritation.
Ingestion: This material is expected to be an ingestion hazard.

l      First Aid Measures:
Eye Contact: Immediately wash eyes with large amounts of water for at least 15 minutes and contact physician as needed.
Skin Contact: Remove contaminated clothing and shoes and  Immediately wash skin with large amounts of water.
Ingestion: Drink large amounts of water or milk. Contact physician. DO NOT  induce vomiting.

l   Protective Equipment and Other Control Measures:
Respiratory:Not required.
Eye: Approved safety glasses with side shield.
Clothes: Protective work clothes.
Additional Comments: Eye washes and safety showers should be available.
Educate and train employees in the use of this product, besides also follow all label instructions.

l       Disposal Methods: Recycle or rework if feasible.

l        Note:                              :
    The information in this MSDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness.
    The MSDS was prepared and is used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.