Direct Info
 

Welcome!

Products

R&D

About Us

Contact Us

 

Zocide® Z1 Indoor infection preventing disinfectant

                              Direct Info CO.,LTD.                                

TYPICAL PROPERTIES (Material Safety Data Sheet)

l        Appearance                   : Clear solution

l        Chemical Type                : Compounded Mix

l        Components & Chemical Description:

          Glutaraldehyde

          Additives        

l        Hazardous Ingredients         : Glutaraldehyde

 

 l        Reactivity Data:
Hazardous Polymerization: Will not occur.
Incompatibility: None Known to cause dangerous condition.
Conditions to avoid: Avoid any direct sunlight and not leave it under any other radiation sources.

l       Fire and Explosion : Non-flammable
Flash point: Not detected

l        Health Hazards:
Eye Contact: This material is expected to cause eye Contact hazard.
Skin Absorption: This material is expected to cause Skin Contact hazard.  
Ingestion: This material is expected to be an ingestion hazard.

l       First Aid Measures:
Eye Contact: Immediately wash eyes with large amounts of water for at least 15 minutes and contact physician as needed.
Skin Contact: Promptly and thoroughly wash skin with water and remove contaminated clothing and shoes.
Ingestion: Contact physician.

l        Protective Equipment and Other Control Measures
Respiratory: Not required if adequate ventilation is maintained, otherwise an  approved organic vapor full-face respirator is advised.
Eye: Approved safety glasses with side shield.
Clothes: Protective work clothes.
Additional Comments: Eye washes and safety showers should be available.
    Educate and train employees in the use of this product, besides also follow all label instructions.

l        Spill and Disposal                :
Response to spills: Shovel or vacuum spilled product and place in closed containers for further handling.
Precautions: If airborne concentration exceeds established exposure limits, evacuate employees and ventilate the area.
Disposal Methods: Recycle or rework if feasible.

l        Note                              :
    The information in this MSDS was obtained from source which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness.
    The MSDS was prepared and is used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Welcome!

Products

R&D

About Us

Contact Us